净水厂氯气泄漏的环境风险分析

以丹阳净水厂为例，选取大气非正常排放模式，预测了液氯钢瓶阀门泄漏及爆炸对周围环境和保护目标的影响，并模拟了钢瓶爆裂事故的后果，计算出事故发生时的初始警戒区半径，提出了相应的氯气泄漏防范措施。     

广州市在用机动车排气抽检工作若干问题探讨

介绍了广州市在用机动车抽检工作情况和程序,分析了排气抽检工作中存在的问题,提出了解决问题的建议和方法。     

Restricted adaptive cluster sampling

Adaptive cluster sampling can be a useful design for sampling rare and patchy populations. With this design the initial sample size is fixed but the size of the final sample (and total sampling effort) cannot be predicted prior to sampling. For some populations the final sample size can be quite variable depending on the level of patchiness. Restricted adaptive cluster sampling is a proposed modification where a limit is placed on the sample size prior to sampling and quadrats are selected sequentially for the initial sample size. As a result there is less variation in the final sample size and the total sampling effort can be predicted with some certainty, which is impor- tant for many ecological studies. Estimates of density are biased with the restricted design but under some circumstances the bias can be estimated well by bootstrapping. © Rapid Science 1998     

类固醇雌激素分析方法研究进展

类固醇雌激素因其对野生动物、人类健康及生态环境安全造成危害而受到全世界的普遍关注,并成为环境科学和生态毒理学研究的重点和热点之一.针对4种典型的类固醇雌激素(雌激素酮、17-β-雌二醇、雌三醇和17-α-乙炔基雌二醇),对其羟基和酮基衍生化技术、水和固体样品的前处理技术及仪器检测方法进行了综述,总结了类固醇雌激素分析方法的研究动态和进展.     

QuEChERS: a sample preparation for extraction of carbaryl from rat feces

Carbamate compounds are an important group of cholinesterase inhibitors. There is a need for creating awareness regarding the risks of the inadequate carbamate use in the residential areas due to potential adverse human effects. Carbaryl is a commonly used pesticide worldwide. A simple, fast, and high-throughput method was developed employing liquid chromatography with fluorescence detector to determine carbaryl residues in rat feces. The extraction was performed by using a rapid, easy, cheap, effective, reliable, and safe (QuEChERS) method, using acetonitrile as the extracting solvent. The parameters for the performance of the extraction method were optimized, such as ratio of mass of sample per volume of extraction solvent, QuEChERS content, and cleanup columns. Linear response was obtained for all calibration curves (solvent and matrix-matched) over the established concentration range (5–500 μg/L) with a correlation coefficients higher than 0.999. The achieved recovery was 97.9% with relative standard deviation values of 1.1% (n = 4) at 167 μg/kg fortified concentration level and the limits of detection and quantification were 27.7 and 92.3 µg/kg, respectively.     

低水平放射性废水中钚的分析方法研究进展

钚是重要的核燃料,也是一种极毒的放射性核素,在核燃料循环和放射性废物处置过程中占有重要地位.近些年来,钚在自然水体中的含量、分布引起人们的关注.科研工作者针对低水平放射性废水,核设施周围自然水体,核试验、核事故情况下可能污染的自然水体等,建立了一些钚的分析方法.作者在对这些方法进行了比较的基础上,提出了一种在盐酸体系中用TEVA树脂负压微色谱柱液闪法将水溶液中钚与其他锕系元素及金属离子分离并测量的新方法.该方法有望在日常和应急监测中的得到应用.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.     

通过屋顶暴露方法模拟聚碳酸酯微塑料在长江水样的长期老化行为

由于较低的自然老化速率,微塑料在实际水体长期户外暴露过程中老化行为的数据仍较缺乏.通过聚碳酸酯（Polycarbonate,PC）微塑料在长江表层水样的18个月户外暴露试验以揭示自然老化过程对微塑料表面特征及对金属离子(Cr⁶⁺和Co²⁺)吸附行为的重要影响.结果显示,户外暴露改变了PC微塑料的理化性质,包括表面开裂、粒径降低、亲水性和熔点增加以及表面氧化（产生羰基和羟基）.同时,户外老化过程明显影响微塑料对金属离子的吸附行为.原始和低老化程度PC对金属离子的吸附主要通过物理作用控制,而高老化程度微塑料由于产生含氧功能团对金属离子的吸附主要由化学过程如络合和共价键等作用控制.并且,不同老化程度PC微塑料对Cr⁶⁺和Co²⁺的吸附性能不同.对于Cr⁶⁺,PC的吸附性能随其老化程度增加呈先升高后降低的趋势,然而对于Co²⁺,平衡吸附性能随老化程度增加呈增加的趋势.户外老化过程产生含氧官能团、破碎和开裂以及生物膜可能是影响吸附性能的主要因素.本研究证实了长期户外...     

战斗部飞行可靠性评估方法研究

目的 解决高可靠、小子样战斗部飞行可靠性评估时样本量不满足标准要求的问题。方法 通过对战斗部结构功能分析,建立包含壳体强度、主装药安定性及主装药正常起爆等单元的可靠性框图,并利用L-M法对战斗部系统进行可靠性评估。首先利用基准设计许用值的安全系数法将应力强度干涉模型与安全系数进行结合,对壳体强度可靠性进行评估;然后结合战斗部试验数据,利用最大熵试验法,在小样本下评估战斗部主装药安定性及正常起爆的可靠性;最后,将各单元的可靠性数据转化为成败型数据进行分析,利用L-M法,结合战斗部整机试验数据,开展战斗部飞行可靠度评估。结果 分别计算了小子样下战斗部壳体和装药安定性及正常起爆的可靠度,并将其转换为等效成功数和等效失败数,结合战斗部试验打靶等可靠性信息,综合评估了战斗部飞行可靠度。结论 充分利用战斗部在研制阶段的试验信息进行评估,减少了样本量,解决了战斗部可靠性高、样本量小的评估难题。     

基于多元随机效应Wiener过程的某弹用弹簧可靠性评估

目的 解决某弹用弹簧可靠性评估中存在的不确定性问题。方法 对某弹用弹簧进行加速退化试验,试验过程中发现其具有多个性能退化参数,并且其退化过程具有非线性、随机性及样本差异性的特征。为了对其退化过程进行数学表征,提出一种基于多元随机效应Wiener过程的退化模型。采用基于时间尺度变换的非线性Wiener过程,描述弹簧退化过程中的非线性与随机性。基于随机效应模型,对样本的差异性进行表征,利用Copula函数描述多元性能参数之间的相互作用关系。最后推导弹簧失效寿命的概率密度函数、可靠度函数。结果 在贮存条件为25 ℃、可靠度为0.9时,基于构建的多元随机效应Wiener过程模型,当考虑性能间的相关性时,得到某弹用弹簧的贮存寿命为12 a;不考虑性能间的相关性时,得到其贮存寿命为11.5 a。结论 构建的多元随机退化模型为该弹药健康状态管理提供了相应的理论依据。